Myrondavis NV8ACC1 Manuel d'utilisateur

Installation Instructionshttp://www.myronanddavis.comHonda AccordNV8ACC1INSTALLATION INSTRUCTIONS AND USEThe Myron & Davis In-Dash Navigation Syst

Step 6 - Connect OEM LCD harness to the extensionStep 7 - Connect wiring to Myron & Davis screenStep 8 - Install screen and secure wiith screwsS

Step 13 - Install driver side trimStep 14 - Install passenger side trimStep 15 - Secure OEM Radio under cavityStep 16 - Make all connection to Myron

Step 22 - Final look

http://www.myronanddavis.com1425 Cooley Court, San Bernardino, CA 92408Toll Free: 886.335.6789Fax: 909.799.7300

Myron and Davis Entertainment SystemsMulti-Media Navigation System Installation Guide- Read the entire installation instructions prior to performing a

Installation Instructions2- Caution-BatteryCheck the battery to ensure it is fully charged.NOTE: Some new vehicles batteries are not fully charged and

Step 1 - Loosen driver side dash trim Step 2 - Remove right side dash trimStep 3 - Loosen left side dash trimStep 5 - Loosen center console trimStep

Step 9 - Completely remove bottomhousing4 - Removal Of The Dash Trim Cont’d

Step 1 - Remove right screw under right side dash trimStep 2 - Remove left screw underleft side dash trimStep 3 - Remove 2 bottom screws securing OEM

Step 8 - Remove 2 screws on the bottomsecuring the upper housingStep 9 - Remove upper plastic housingStep 10 - Remove 2 top screws securing OEM LCDSte

Step 1 - Mount the GPS and Satellite Radio antenna on the exterior of the vehicleStep 2 - Connect the optional Satellite Radio Tuner as shown belowSte

Step 4: Prepare vehicle harnessesStep 1 - Remove 4 screws from OEM LCD DisplayStep 2 - Remove OEM LCD DisplayStep 3- cont’d Step 4 - Secure OEM LCD di